700c, 27-Inch & 650c

The Lightweight MEILENSTEIN wheel with its full carbon spokes is the classic at Lightweight. Developed from the beginning for all-round use, this wheel still proves its ingenious versatility every day. The MEILENSTEIN EVO scores with all the features of its predecessor and goes one step further, because of its robust construction it is now approved for Gravel. State-of-the-art high-modulus carbon fibers combined with tubeless technology provide razor-sharp control, unparalleled braking precision and maximum propulsion. And best of all, it's even more comfortable to ride than ever before. The MEILENSTEIN EVO is compatible with all common shifting systems and thanks to the DT-Swiss hub it can be used on almost all axle standards. If you want to take your road bike performance to the next level, this wheelset is the right choice.

The Speed 360 DB rear wheel is designed for speed. Developed with pro teams to set a benchmark for rigidity in the market, the full-carbon disc design provides an aerodynamic solution, ideal for Time Trial and Triathlon riders. - 12k carbon finish - 2-way Fit - tubeless ready rim - Cult ceramic bearings - Center-Lock disc brake hub - Includes rim tape and valve

PEAK 4550: A New Milestone in Performance Cycling Wheels Exceptional Handling. Ultra Lightweight. King of the Mountain. Princeton CarbonWorks announces their all new PEAK 4550, developed in conjunction with the top cyclists in the world; a lighter, stiffer, stronger, and more aerodynamic solution directly targeted at world tour and grand tour racing (and of course, ALL racing and riding…) Available in every configuration, (tubular, tubeless ready clincher, rim and disk brake) the PEAK 4550 set weighs as little as 1071g in tubular rim brake guise, with standard tubeless ready clincher versions weighing 1280g for disc brake. Development priorities were to create an all-around race ready wheel with exceptional aerodynamic characteristics and the strength and stiffness to transfer high wattages to the ground. The performance characteristics of grand tour riding are perhaps the most difficult to synthesize in a single wheelset. Riders need a wheelset that is light and responsive for the climbs. On the descents, they need predictable and sharp handing. In the valleys, the wheelset needs to be aerodynamic and impervious to crosswinds. And above all of that, the wheels need to hold up to thousands of kilometers of full gas racing. PCW’s standard non-drilled tire bed facilitates a stiffer outer rim and transfers some material away from the tire bed to other critical areas in the wheel, helping to keep wheel weight low while maintaining high stiffness values. Internal width (hook to hook): 20.5mm External width (max): 27.5mm Spokes: Sapim CX-Ray Nipples: Sapim SecureLock Alloy Disc Brake with Tune Hubs and SRAM XDR driver

Thanks to Zipp’s Total System Efficiency (TSE) carbon laminate and design, the Super-9 is engineered for a new era of wider tires and lower tire pressure in TT and triathlon. Combining Zipp’s wheel laminate with a wider rim profile and optimized tire interface helps you overcome the four barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The Super-9 is fastest with 28mm tubeless tires inflated to lower than traditional pressure. To ensure proper inflation, the Super-9 comes with the TyreWiz 2.0 tire-pressure monitor integrated out of sight and perfectly balanced so you’ll always know if you’re in your desired PSI/bar range. Inflation is a breeze with redesigned pump access. Moreover, the disc features a redesigned pump-access port—no stickers needed. The Super-9 features the premium ZR1 hub with ceramic bearings and 66 points of engagement. - Aero, durable, light weight - Tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Greater stopping power and modulation of disc brakes - 23mm internal rim width - 28mm minimum and optimal tire size recommended - Integrated TyreWiz 2.0 tire pressure monitor and redesigned pump access cover - Low drag ceramic bearings for race day performance - Includes pumpchuck adapter and Zipp wheel bag

Designed to elevate ride feel on mixed terrain routes, from tarmac to gravel roads, Sharq is the result of painstaking research, advanced engineering and extensive work in design and testing, to achieve the best performance possible. Sharq wheels have an inner rim width of 25 mm, an effective compromise both for road tires with a minimum width of 30 mm, guaranteeing good aerodynamics and improved rolling resistance, as well as for wider knobby tires, which will have a solid support for off road use. To ensure that the rim can be used for tubeless systems and with inner tubes, it features mini-hooks that provide maximum safety. As is customary for Fulcrum the bridge is not drilled and, therefore, it is tubeless native, without the need for any additional tape. - Full-carbon rim with direct in-mold construction and matte finish, high rim profile 42 - 47mm - Two-Way fit design for tube and tubeless applications - Aluminum hubs with USB ceramic, Adj. Cup and Cone bearing system - Mo-Mag system: No holes on the rim means that the rim is uniform at every point, free from stress points or zones of weakness and, for the clincher profiles no rim tape is required, to the benefit of weight reduction - 24H, 2:1 spoke ratio with straight-pull, stainless steel, double butted spokes - Supports tire widths from 30mm to 65mm

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D’Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability - Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight - Built with DT Swiss Hubs

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

The Metron 60 SL TL is Vision’s Aero Stage Race wheelset. The Metron 60 is the one wheel you’ll ride once and won’t want to ride without again; it sits comfortably in the mid-range of Vision’s Metron rim depths and offers the most versatility in the line up. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included - 60mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

The Metron 45 SL TL Disc is the tactical wheelset essential to your quiver. The Metron 45 is an “all-around” wheelset built to take you from climbing all the way to gravel or CX. Victorious on the Cyclocross course, the cobbles of the spring classics, and the torturous mountain stages in the Pro peloton, this wheelset can handle whatever you put them through. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included -45mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

Hyperon Ultra wheels are designed for the most refined and demanding cyclists. A wheel that embodies the true product perfection that stems from unparalleled Campagnolo experience. The result is a new wheelset for racing bikes with the magic ratio of features: lightweight construction, unmatched reactivity and superior handling. - 37mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system with 21mm internal width to accommodate clincher and tubeless tires - Monolithic disc brake hubs with CULT ceramic bearings and aluminum axle to support low rolling resistance - 21 circular-section slim steel spokes in a two-cross pattern - Aero Mo-Mag technology maximizes aerodynamics and enables the construction of a lighter rim - Includes 50mm Tubeless valve, Campagnolo wheel bag and tire levers

The all-new Roval Rapide CLX III wheels flip aero convention on its head for unmatched speed across any course. Up front, a deep-profile rim slices air where it matters most. Out back, a lower-profile rim and carbon spokes shaves 215g, unlocking explosive acceleration and razor-sharp control. And with FlatStop Bead Hooks requiring 39% more force to flat you’ve got best-in-class protection to go full gas all the way to the line. Get there fast, every time, on any course with Roval Rapide CLX III. Use - Road Racing & Riding. Weight - 1,305 grams Hub & Engagement - DT Swiss 180 EXP internals, 36T Rim Depth - 51mm front / 48mm rear Spokes - 18F / 24R Carbon Tire Size - Optimized for 28mm

Meet the Roval Rapide CLX Sprint—built to get to the finish line first. Since 90% of aero benefit comes from the front wheel, we went all-in with a 63mm deep front rim to slice through the wind, and a lightweight 58mm rear with carbon spokes for blistering acceleration when it counts. Charge full gas with confidence: FlatStop bead hooks demand 39% more force to flat, delivering race-day reliability that lasts to the line. Roval is shifting the aero paradigm—depth redefined for absolute speed. Use - Road Racing Weight - 1,395 grams Hub & Engagement - DT Swiss 180 EXP internals, 36T Rim Depth - 63mm front, 58mm rear Spoke Count - 18F/24R Tire Size - 28mm Optimized

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

The Bora Ultra WTO 35 has the shallowest wind tunnel optimized (WTO) rim profile of the new Ultra wheel family, redesigned to maximize aerodynamics and reduce weight. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving you precious energy and generating greater speed from the same rider input. Campagnolo’s CULT ceramic bearings spin effortlessly within the front disc hub’s aerodynamic carbon body, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 35mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

Excellent aerodynamics and safe steering behavior for a decisive competitive advantage; the ARC 1100 DiCut wheels are made to go flat out fast. Drag and steering movements are reduced thanks to the AERO+ rim that's been aerodynamically optimized by Swiss Slide- these high-end quality wheels are ready to win.

Various road surfaces or weather conditions cannot deter you: the endurance-specific ERC 1100 wheels enable you to ride fast and stable. With AERO+ optimized rim profiles, wider and more comfortable tires are better supported. Ultra low-friction SINC Ceramic bearings inside DICUT Aero hubs and the latest generation of DT Swiss aero spokes are technical highlights inside the wheels. The proven Ratchet EXP freehub system with its 36T Ratchets transfers each pedal stroke precisely into forward propulsion and speed from the start right to the finish of your ride. - Aero-optimized wheels with Carbon rim supports your ride on different road profiles. Whether you enjoy an easier longer climb or the following smooth descend, riding will feel almost effortless

At only 33mm deep, the Campagnolo Bora Ultra WTO 33 has the shallowest wind tunnel optimized (WTO) rim profile of the Ultra family. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving precious energy, and generating greater speed from the same rider input. - The Bora Ultra WTO 33’s lower weight helps riders to reach heights even faster, change pace instantly, and descend with great speed and confidence - Rims are crafted from Campagnolo’s Hand Made Ultra-Light Carbon (H.U.L.C.) - Rims feature Campagnolo’s mirror-like Luxury (C-LUX) finish - Undrilled 2-Way Fit rim beds allow for perfect tubeless compatibility without rim tape - Carbon fiber front hub body is hourglass shaped to improve aerodynamics, and is securely bonded to a light aluminium hub flange - Integrated radial spoke seats ensure perfect alignment

Campagnolo’s Bora Ultra WTO 45 has the perfect balance of speed, agility and stability, making it the best choice for all-round riders. The rim’s versatile design takes account of real-world riding conditions, not just those created in a wind tunnel, and the result is the most efficient drag-reducing rim shape available. - Lightweight, thanks to its Hand Made Ultra-Light Carbon (H.U.L.C.) construction - Slimmer Aero Elliptical spokes and hidden nipples help slice through the air - Hub body is securely bonded to a light aluminium hub flange - Integrated radial spoke seats ensure perfect alignment - A uniquely stunning C-LUX finish and new, subtle Bora Ultra graphics ensure the wheels have the show to match their go - Ceramic bearings spin effortlessly within the front aerodynamic carbon body of the disc hub - The 2-Way Fit rims are ready for immediate tubeless use without rim tape, designed for tire widths from 23mm - Aerodynamically optimised for 25mm tires - Weight: 660 g

Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Reserve returns with the ultimate climbing wheelset; the 34/37 Turbulent Aero. Developed using Turbulent Aero data and technology, the 34/37 TA is designed to help get you up those mountain passes as fast as possible. Comparted to the original 34/37, the revised TA set is 30 grams lighter per rim, and 4 grams faster in the wind tunnel. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Designed to be your no fuss climbing wheelset. There are no weight limits, no tire limitations, and can be set up tubeless or with tubes - Mixed profile front and rear rims provide maximum stability, lowest weight and optimized aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Lifetime warranty supported by a no-fault crash replacement - Built with DT Swiss Hubs

Bringing cutting edge performance to the diverse needs of drop bar off-roaders, Reserve’s 40/44 GR gravel wheels are tailored for the demands of off-road exploration and gravel riding, but with an aero focus. Leveraging Turbulent Aero technology, the 40/44 GR features a 40mm front paired with a 44mm rear, establishing it as the fastest and most stable Reserve gravel wheelset to date. Wider than the previous gravel wheels to allow for tires up to 50c tires, the 40/44 GR plays nicely with today’s slew of big volume gravel tires and a semi-hooked rim makes tubeless set up easier than ever. - Designed to be your no fuss aero gravel riding and racing wheelset - Wider internal width of 27mm - Tubeless and tube compatible - Wide/low front mixed with narrow/tall rear for maximum stability, lowest weight and optimal aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Built with DT Swiss Hubs

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D’Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability - Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight - Built with DT Swiss Hubs

The Bora Ultra WTO 35 has the shallowest wind tunnel optimized (WTO) rim profile of the new Ultra wheel family, redesigned to maximize aerodynamics and reduce weight. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving you precious energy and generating greater speed from the same rider input. Campagnolo’s CULT ceramic bearings spin effortlessly, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 35mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

More than iconic, the Bora Ultra WTO 45 wheels find the right balance of speed, agility and stability, making them the perfect choice for all-round riders. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Now even lighter, thanks in part to its Hand Made Ultra-Light Carbon (HULC) construction, the Bora Ultra WTO 45 has slimmer Aero Elliptical spokes and hidden nipples to help slice through the air. Campagnolo’s CULT ceramic bearings spin effortlessly, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 45mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

At only 33mm deep, the Campagnolo Bora Ultra WTO 33 has the shallowest wind tunnel optimized (WTO) rim profile of the Ultra family. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving precious energy, and generating greater speed from the same rider input. - The Bora Ultra WTO 33’s lower weight helps riders to reach heights even faster, change pace instantly, and descend with great speed and confidence - Rims are crafted from Campagnolo’s Hand Made Ultra-Light Carbon (H.U.L.C.) - Rims feature Campagnolo’s mirror-like Luxury (C-LUX) finish - Undrilled 2-Way Fit rim beds allow for perfect tubeless compatibility without rim tape - Oversized 36 tooth ratchet freehub is fast to engage and very durable, plus it accepts N3W, XDR, HG freehub bodies - Integrated radial spoke seats ensure perfect alignment

The GRC 1100 DICUT gravel wheels are designed for multiple situations, with two rim height options available to meet your needs. Whether you’re on the hunt for a win in a fast-paced gravel race with the 50mm high rim, or looking to unhook yourself from your limitations on an extreme off-road adventure with the 30mm high rim, these wheels are sure to catch the eye, while saving weight with improved aero-optimization. - Built using a state-of-the-art carbon manufacturing process, resulting in lightweight carbon rims straight out of the mold, without the need for a finishing coat - Assembled with the lightweight 180 DICUT hub with ceramic bearings and DT Aerolite spokes, providing fast acceleration and low rolling resistance - Intended use = Gravel/Off-road - Ratchet EXP freehub drive system - Includes tubeless valve, tape and wheel bag - Tubeless ready, 24mm wide carbon rim with 30mm high profile rim

The GRC 1100 DICUT gravel wheels are designed for multiple situations, with two rim height options available to meet your needs. Whether you’re on the hunt for a win in a fast-paced gravel race with the 50mm high rim, or looking to unhook yourself from your limitations on an extreme off-road adventure with the 30mm high rim, these wheels are sure to catch the eye, while saving weight with improved aero-optimization. - Built using a state-of-the-art carbon manufacturing process, resulting in lightweight carbon rims straight out of the mold, without the need for a finishing coat - Assembled with the lightweight 180 DICUT hub with ceramic bearings and DT Aerolite spokes, providing fast acceleration and low rolling resistance - Intended use = Gravel/Off-road - Ratchet EXP freehub drive system - Includes tubeless valve, tape and wheel bag - Tubeless ready, 24mm wide carbon rim with 50mm high profile rim

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with DT Swiss Hubs

While DT's Hybrid Endurance wheels are made to deliver maximum speed on tarmac, the Hybrid Gravel wheels will deliver maximum fun on gravel roads. The HGC 1400 Spline is the exclusive answer for all high-end E-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end E-specific components, this wheel has the pedigree to be the uncontested King of E-gravel. - 3 cross spoke pattern, DT AeroComp Hybrid straight pull spokes, DT Pro Lock hidden aluminum spoke nipples

DT Swiss has engineered the ultimate aerodynamic combination of wheel and tire interface in collaboration with Continental, with a joint tire: the Aero 111 Wheel and tire combinations pre-chosen and designed to be as aerodynamically efficient as possible. Tire Features: - Aero wheels have Aero 111 26mm front tire and GP 5000 STR 28mm rear tire (Front & rear sold separately) - Aero 111 tires feature 48 `vortex generators` which greatly reduce drag across the entire wheel system, freeing up additional wattage - Continental`s Black Chili compound and Vectran Puncture-resistant technology Wheel Features: - Latest generation of ARC wheels sees increase in width to 22mm internal for modern, wider tire support - 55mm tall profile is the shortest of 3rd gen ARC wheel, offering an aerodynamically optimized, yet agile and responsive wheel - New redesigned rim shape offers lower drag and smoother airflow between tire and rim interface - The ARC1400 features a new 240 Dicut Aero hub as well as DT`s classic Aero Comp spokes

DT Swiss has engineered the ultimate aerodynamic combination of wheel and tire interface in collaboration with Continental with a joint tire: the Aero 111 Wheel and tire combinations pre-chosen and designed to be as aerodynamically efficient as possible Tire Features: - Aero wheels have Aero 111 26mm front tire and GP 5000 STR 28mm rear tire (Front & rear sold separately) - Aero 111 tires feature 48 `vortex generators` which greatly reduce drag across the entire wheel system, freeing up additional wattage - Continental`s Black Chili compound and Vectran Puncture-resistant technology Wheel Features: - The latest generation of ARC 1400 wheels sees an increase in rim width and further aerodynamic optimization - Features 240 series Dicut hubs paired with Aero Comp II T-head spokes and Pro Lock Hidden nipples - 65mm tall profile offers a balance of aerodynamics and agility for road and endurance riding

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. There’s no better option for the uncompromising climber who values performance up and down the mountain than the new SES 2.3. At sub-1200 grams, they’re in a league of their own and deliver a real-world advantage in hilly terrain through their lightweight design and confidence-inspiring handling. - Full carbon rim features continuously running fibers throughout the rim, tapering laminates, and removing excess material, the SES 2.3 achieves an impressive feat in weight reduction and composites engineering. Additionally, layering fibers in specific orientations achieves zone-specific performance requirements like impact toughness, stiffness, and tire retention - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel

As the most versatile wheel in the line, the SES 3.4 is the go-to for just about any terrain or surface conditions. The high-volume design of the rim and Wide Hookless Bead technology not only makes the SES 3.4 a modern road wheel that is raced at the World Tour level, but it’s also a favorite for mixed surface events due to its feature benefits that clearly separate it from other wheels in the same depth category. Pinch-flat resistance, low weight, and an aero profile optimized around high-volume tires are key features of the SES 3.4, making it the most adept all-around wheel. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 42mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 29mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

When speed across most any terrain is priority number one, look no further than the SES 4.5. Originally designed for the cobbles and crosswinds of Paris-Roubaix to provide an aero benefit with high volume tires, the SES 4.5 was the first of its kind and is now re-designed to deliver more speed in a lighter package. The SES 4.5 has been re-engineered to reduce weight, increase aero efficiency and further expand its capabilities when the going gets fast. Whether you’re pinning on the number for race day or seeking the fastest road wheelset across undulating terrain, the SES 4.5 is in the sweet spot for speed. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 56mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 27 - 28mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

Striking the ultimate balance between weight savings, stability, aerodynamics, and rolling efficiency, the SES 6.7 defines Real-World Fast and raises the bar for modern aero wheel performance. Grams of rim, versus grams of drag, make the SES 6.7 the outright fastest wheel on the road. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 67mm rear depth and 23mm internal rim width supports minimum tire sizes of 25mm, with an Aero Optimized design around 27 - 28mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready - Due to the refined and lightweight construction of the SES 6.7 and its sidewalls, this wheel is not suitable for off-road/gravel applications

The ARC 1400 DICUT is made to go flat out fast at full speed. Developed in partnership with the aerodynamic specialists from Swiss Side, the ARC 1400 DICUT is available in rim brake version in different rim heights. The Aero wheels support the complete system of rider and bike with minimal drag and superior aero stability in various conditions. The rim of the aerodynamically optimized wheel is identical to that of the ARC 1100 DICUT series. The wheelset is upgraded with a 240 DICUT Aero hub incorporating the Ratchet EXP technology for precise engagement. In a nutshell, perfectly equipped for races against the clock. - Carbon, Hooked / Crotchet tubeless compatible rim; the shape offers high aero stability and minimal aero drag for maximum speed - 240 Dicut Aero Hub with redesigned flanges, featuring Ratchet EXP freehub technology with precise and reliable engagement by its 36T Ratchets - DT aero comp t-head spokes

The ARC 1400 DiCut delivers its full potential whenever your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

The ARC 1400 DICUT is made to go flat out fast at full speed. Developed in partnership with the aerodynamic specialists from Swiss Side, the ARC 1400 DICUT is available in rim brake version in different rim heights. The Aero wheels support the complete system of rider and bike with minimal drag and superior aero stability in various conditions. The rim of the aerodynamically optimized wheel is identical to that of the ARC 1100 DICUT series. The wheelset is upgraded with a 240 DICUT Aero hub incorporating the Ratchet EXP technology for precise engagement. In a nutshell, perfectly equipped for races against the clock. - Carbon, Hooked / Crotchet tubeless compatible rim; the shape offers high aero stability and minimal aero drag for maximum speed - 240 Dicut Aero Hub with redesigned flanges, featuring Ratchet EXP freehub technology with precise and reliable engagement by its 36T Ratchets - DT aero comp t-head spokes

Wherever the road takes you, the ERC 1400 wheels with AERO+ optimized rim profiles allow you to stay in control during your extended endurance ride. Ride longer distances effortlessly thanks to wider and more comfortable tires. Each pedal force is transferred into propulsion and speed onto the 240 DICUT Aero hub by the reliable Ratchet EXP freehub system and DT aero comp t-head spokes. Simply enjoy your ride along the way. - Fast and light, Aero-optimized wheels for those longer rides on various terrains along your route. Ride comfortably and handle your bike safely even in fast descends

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires - 36T RatchetSystem technology

- Latest generation of ARC wheels sees an increase in width to 22mm internal for modern, wider tire support - 55mm tall profile is the shortest of 3rd gen ARC wheel, offering an aerodynamically optimized, yet agile and responsive wheel - New redesigned rim shape offers lower drag and smoother airflow between tire and rim interface - The ARC1400 feature a new 240 Dicut Aero hub as well as DT Aero Comp II spokes and Pro Lock Hidden nipples

- The latest generation of ARC 1400 wheels sees an increase in rim width and further aerodynamic optimization - Features 240 series Dicut hubs paired with Aero Comp II T-head spokes and Pro Lock Hidden nipples - 65mm tall profile offers a balance of aerodynamics and agility for road and endurance riding

The all-new Roval Rapide CLX III wheels flip aero convention on its head for unmatched speed across any course. Up front, a deep-profile rim slices air where it matters most. Out back, a lower-profile rim and carbon spokes shaves 215g, unlocking explosive acceleration and razor-sharp control. And with FlatStop Bead Hooks requiring 39% more force to flat you’ve got best-in-class protection to go full gas all the way to the line. Get there fast, every time, on any course with Roval Rapide CLX III. Use - Road Racing & Riding. Weight - 1,305 grams Hub & Engagement - DT Swiss 180 EXP internals, 36T Rim Depth - 51mm front / 48mm rear Spokes - 18F / 24R Carbon Tire Size - Optimized for 28mm

Meet the Roval Rapide CLX Sprint—built to get to the finish line first. Since 90% of aero benefit comes from the front wheel, we went all-in with a 63mm deep front rim to slice through the wind, and a lightweight 58mm rear with carbon spokes for blistering acceleration when it counts. Charge full gas with confidence: FlatStop bead hooks demand 39% more force to flat, delivering race-day reliability that lasts to the line. Roval is shifting the aero paradigm—depth redefined for absolute speed. Use - Road Racing Weight - 1,395 grams Hub & Engagement - DT Swiss 180 EXP internals, 36T Rim Depth - 63mm front, 58mm rear Spoke Count - 18F/24R Tire Size - 28mm Optimized

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that's unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What's being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you're able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what's ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer-the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width—ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm Tire Size: 28mm—47mm—Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand built at every step, from rim layup to the last nipple turn. Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance. - Full carbon tubeless ready rim, laced to a straight pull 240s based hub - Tubeless tape 25mm - Tubeless valve road 32mm

Racing Zero Carbon CMPTZ DB wheels set the benchmark for style and performance, balanced with high quality materials and design. - 30 mm high-profile unidirectional carbon rim with ARC TECHNOLOGY reinforcements at the most critical points wthin the wheel - 19 mm internal width and 2-Way Fit™ technology for clincher or tubeless set ups - CULT bearings for unparalleled smoothness and reduced weight - 2:1 spoke ratio with disc brake hubs

While DT's Hybrid Endurance wheels are made to deliver maximum speed on tarmac, the Hybrid Gravel wheels will deliver maximum fun on gravel roads. The HGC 1400 Spline is the exclusive answer for all high-end E-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end E-specific components, this wheel has the pedigree to be the uncontested King of E-gravel. - 3 cross spoke pattern, DT AeroComp Hybrid straight pull spokes, DT Pro Lock hidden aluminum spoke nipples - 30mm high profile rim

Speed 25 wheels were developed with a precise objective: achieve maximum performance uphill. Designed with Fulcrum’s premier technologies to marry lightness and handling in a low-profile wheel, the Speed 25 is ideal for cyclists looking to post their best times uphill, but also for ultra-cyclists who deal with adverse weather conditions and want a stable and reliable wheel even in strong gusts of wind. - Carbon Fiber, Disc-brake rims feature an inner rim width of 21mm and profile height of 26mm - 2-Way Fit system lets you fit tubeless tires without rim tape, thanks to the non-drilled bridge - DIMF technology creates a matte finish directly from the mould without the need for paint treatments - USB ceramic bearings guarantee 50% less rolling resistance compared to standard bearings - Minimally-designed hubs paired with flat, aerodynamic spokes - Asymmetrical rear rim provides better dish angles to achieve great lateral stiffness; fundamental for uphill sprints

Industry Nine’s most well-rounded, adventure-ready wheelset gives the rider high-tech features and a ride quality that only the Solix G hub and spoke system can offer. At the heart of Solix G UL250a wheels is the lightning-fast Solix drive mechanism that translates crank movement to instant propulsion. With 605 points of engagement, you’ll feel connected to the terrain and be able to provide pedal input immediately to command your ride over nearly any road surface from smooth fire roads to washboarded and bouldered jeep roads and everything in between. This confidence is only bolstered by the Solix G chassis - an Industry Nine exclusive reimagining of the hub and the spoke interface. Laced directly into the Solix hub flange are 24 machined straight-pull aluminum spokes that thread right into the hub shell. - 5-Pawl Solix freehub body with 605 points of engagement. This patent-protected freehub technology offers unrivaled .59° engagement for the Solix family of wheels - The UL250 aluminum rim is built for tubeless gravel and MTB tires up to 55mm or 2.1”, features a hooked bead and a barbed bead shelf that keeps tires right where they should be - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - Combining the immediate response of the Solix freehub with this evolutionary hub and spoke chassis gives the rider a system that can challenge carbon rim wheelsets for ride quality and durability - 2-Year Warranty coverage against defects

The G23 is an original purpose-built gravel race wheelset, made for high-speed, big elevation, off road pursuits. The G23 exceeds the performance and ride quality demands of serious mixed surface cyclists. Armed against pinch flats, with a tough, relentless but refined character, it is the king of the road, path and trail. Riders looking for maximum versatility, speed and efficiency will gravitate towards the G23 paired with a 40mm tire. - Full carbon rim features wide hookless beads that provide a 60% improvement in pinch flat resistance, while maintaining the ability to run lower tire pressures and improve traction and rolling resistance - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 23mm internal rim width supports 35 - 45mm tires

When pushing the highest speeds in time trial and triathlon racing, the SES 7.8 will provide you an unmistakable aero advantage. The outright fastest wheelset in ENVE’s line is well proven in the world’s biggest races. The SES 7.8 features asymmetric rim geometries with the rear rim at 80mm deep and 27.5 mm wide, designed to improve the efficiency of the airflow in the system of bike frame and wheels when paired together. - Full carbon rim is optimized for improved aerodynamics, and provide better tubeless performance - Tubeless compatible design allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 78mm rear depth and 19mm internal rim width supports an Aero Optimized design around 25mm tires - Rims are pre-taped and tubeless ready

Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g

We believe we've made the fastest all-around road wheels in the world. The Rapide CLX wheelset essentially combines the aerodynamic excellence of our UCI TT World Championship dominating CLX64 with the light weight and gentlemanly handling of our Polkadot-Jersey winning CLX32. The result is a wheelset that delivers maximum speed in conditions found in real-world riding; climbing performance, slippery efficiency of a dedicated aero setup, and stable, confident handling, regardless of wind conditions. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 60mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal, 30.7mm external - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 751g

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.