Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Roval Traverse Fattie 29 Wheelset
$600.00
Traverse means to ride up, across and down, which is exactly what Roval's Traverse Fattie 29 Wheelset does best. Made with tough Specialized E5 aluminum rims laced with pro-level DT Swiss spokes and nipples, these wheels are a sure fire way to supercharge your trail riding. The 29mm internal rim width supports tire sidewalls better for increased volume, allowing lower pressures, more grip, less air burping, and a ride that feels like your bike gained an extra inch of travel. You can run them with or without tubes and the front hub is compatible with 20mm or 15mm through-axles. The rear hub, replete with DT Swiss 360 internals, comes with end caps for a 135mm quick release or a 12x142mm through axle.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Whisky Parts Co. Tubeless Rim Tape
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Lezyne CNC TLR Valve Pair
$19.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Wahoo KICKR SNAP 142 x 12mm Thru Axle Adapter
$59.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
Salsa Deadbolt Ultralight Thru-Axle
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation
SRAM MTH 716 Front Hub
$69.00 - $85.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
SRAM MTH 746 Rear Hub
$109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
SRAM 746 Rear Disc Hub
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
Shimano Deore XT Enduro Disc Tubeless Wheelset (15mm through-axle front, 12mm rear)
$749.99
Enduro racing demands unique equipment, and Shimano's Deore XT Enduro Wheels fill the niche with low weight for efficient climbing and DH-style toughness for technical downhill sections. The wheels sports stiff, 25mm-wide, tubeless-ready rims and fully rebuildable angular-contact bearing hubs. A stout 15mm front through axle stiffens up your front end for precise tracking and cornering, and Shimano's Deore XT freehub sports quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. Center-lock rotor mounts make brake rotor installation quick and easy.
DT Swiss HX 1501 Spline ONE 30 Front Wheel
$611.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
ENVE Spoke Nipple
$10.40
Replacement nipples for installing spokes on ENVE carbon fiber cycling wheels. Rim, spoke, and hub won’t stay together on their own. These are the only nipples you should use on our wheels. - Material: Brass - ENVE nipples are required in order to keep your wheel warranty valid
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Dimension Freewheel Spoke Protector
$7.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads
Wheels Manufacturing Inc. Axle-11
$35.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 130mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 141mm - 1 axle per bag
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$10.80 - $11.35
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Campagnolo Bora Ultra 50 Clincher Wheelset
$3,610.00
Innovating the wheel that for years has been a market benchmark might have seemed difficult and risky, but the Campy Tech Lab designers have managed to maintain those characteristics of flexibility and ease of handling that have made this high-profile wheel easy to steer, high performing and safe. The Bora Ultra 50 bursts onto the market not only with introduction of the new tire bed dedicated to the clincher, but also with improvements to the previous version in terms of lightness, aerodynamics, stiffness and comfort thanks to use of the new wider rim and front and rear hubs with different diameters. The 2018 range sees the addition of the new AC3 (All Conditions Carbon Control) Technology braking track, which brings braking safety on wet terrain closer to that on dry. Plus, extremely clean-cut aesthetics guaranteed by innovative water-transfer graphics. All without giving up on the extreme smoothness, which has become the market benchmark and is the result of use of CULT bearings. - 50mm Full Carbon rim guarantees the best quality available on the market - Long-lasting smoothness is ensured by CULT bearings, nine times better performing than a standard solution - Internationally one-of-a-kind AC3 technology guarantees unique performance by the Bora Ultra 50 also when braking - Excellent grip between brake pad and rim allows for gradual, constant braking and shorter stopping distances, even in wet conditions - Dedicated brake pads (red compound) guarantee reliability and durability - Aerodynamic spokes, wider profile, carbon hubs, CULT bearings, self-locking aluminum nipples, oversize flanges and much more - The distinctive G3 design of the rear wheel guarantees excellent stiffness and an unmistakable look - Weight: 1,435 grams
Wheelsmith Double Butted 14/15/14g (Silver) Spoke
$55.00
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
SRAM XD Driver Freehub Body for 900 Rear Hub
$67.00
Replacement freehub body for Sram 900 series hubs
SRAM Rise 60 Conversion Caps
$18.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
SRAM Rise 60 29-inch Replacement Spokes/Nipples/Washers
$30.00
CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel. - Length: 298mm - Spoke Interface: Straight Pull
DT Swiss XR 1501 Spline One 29
$499.00 - $619.00
DT Swiss' XR 1501 Spline One 29 is a wheelset built for XC racing with the strength and durability for everyday riding. With low weight, a 20mm internal rim width, and a tubeless ready set-up, the aluminum rims excel well beyond the race course. DT's Ratchet freewheel system provides precise engagement that efficiently transfers your pedal strokes into forward motion. Plus, the straight-pull spokes provide even more stiffness for a responsive wheel that feels at home on World Cup cross-country courses and your favorite local loop.
Easton Replacement Spokes
$1.20 - $2.00
- Butted 2.0/1.7 stainless steel - Unique sizes specific to Easton wheels - Sold individually
DT Swiss Aero Comp 14/19/14g (Black) Spoke
$56.95
- Bladed Competition spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 190g (32/265mm) - Box of 20 - Nipples sold separately
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Roval CL 40 Clincher Wheels
$750.00 - $900.00
Roval's CL 40 full-carbon clincher is the perfect all-around race wheel. The aerodynamic, optimized rim shape slices through the wind, while preserving the confident, stable handling of a box section rim. A wide internal rim width provides an optimal tire profile for incredibly precise handling and stiffness. The superior braking performance of the rim is matched with more economical DT Swiss spokes and hub internals.
Roval Terra CLX 700c Rear Wheel
$1,400.00
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 25mm - Rim Depth: 32mm - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length: Drive-Side/Non-Drive: 272mm/277mm - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano HG, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g
Page 1 of 16 Next page