Chainrings

- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD

The Sequence chainring uses the official X-SYNC technology licensed from SRAM for unmatched chain retention. Chromag is the only MTB company officially authorized to produce chainrings with the X-SYNC technology. So now, no matter what kind of mountain bike you have, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. SPECS - Official SRAM X-SYNC technology. Complies with SRAM warranty standards for compatibility with all SRAM X-SYNC drivetrain. - Chamfered mud-clearing recesses at the base of the teeth provide the best possible performance in muddy conditions. - CNC Machined from 7075T6 aluminum for the best durability. - Available for 104/94 BCD crank spider patterns and Direct Mount options. - 7075-T6 aluminum - Anodized Black with laser etch - CNC machined in Whistler, BC. Sequence rings are available in: - 30/32/34/36 tooth (104 BCD) - 28/30 tooth (94 BCD) - 28/30/32 tooth (Direct Mount RFC) - 28/30/32 tooth (Direct Mount GXP) - 28/30 tooth (Direct Mount BB30) - 28/30/32 tooth (Direct Mount Boost) Compatibility Notes: - 104 BCD is the most popular crank arm spacing design (refer to manufacturers specifications to check for compatibility). - Direct mount rings work with SRAM S1400, S2200, S2210, X9 XO and XX1 crank arms. - Direct Mount Sequence rings are available for with GXP and BB30 bottom brackets as well as Race Face Cinch cranks.

Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface

These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible

This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining

A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum

It is exciting to be a part of the recent Enduro, All Mountain and Trail fueled trend that is shifting mountain bike and component design focus from "weight weenie" to "fun, functional, and DURABLE". Made from 416 stainless steel and heat-treated for hardness and strength, these chainrings are not only beautifully machined but they will stand up to whatever you can dish out. These chainrings are functionally the same as Wolf Tooth's Direct Mount for SRAM rings (dished roughly 6mm) except they are made of stainless steel for increased durability. They will have the perfect perfect 1x chainline on SRAM GXP cranks, BB30 Long Spindle cranks, SRAM Road cranks, and SRAM CX1 cranks with removable spiders. - Heat treated 416 stainless steel ring for maximum durability - Replaces the existing chainring and spider on 3-bolt GXP cranks - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Fits SRAM S2200, S2210, X9, X0, X01, XX1, X1 and Truvativ AKA GXP cranks - Dished ring provides 49mm chainline on GXP or BB30 / PF30 long spindle - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 96g (26t)

- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric

It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Chainline/Hub Compatibility: 135/142 MTB Hubs, 150/157 DH Hubs, 170/177 Hubs

Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting.

SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.

Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)

SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear. - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability

The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single

612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch

FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.

- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Short Chain Retention Pin, Use With 36 Tooth Inner Ring - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Long Chain Retention Pin, Use With 36 Tooth Inner Ring - 7000 series aluminum provides strength and durability - For best shifting performance use with 36T ring

Take your chain retention to the quiet, simple, light level with SRAM's X01 X-Sync Chain Ring. It features SRAM's X-Sync narrow/wide tooth profiles to securely hold a chain through the roughest terrain, no chainguide required! A variety of sizes ranging from 30T to 38T let you dial in your rig for your ride. The unique chainring design allows you to slide the ring over the crank arm, so crank removal is not required. Available in 94mm BCD for SRAM's X1 cranks, or 104mm BCD to convert your standard crank to a single-ring system.