Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
Specialized's Elite Rear Rack is a versatile rack that allows you to carry your gear wherever you go. •Lightweight, 6061-aluminum construction •Universal fit for 700c bikes •Fast, easy installation •Max load: 25Kg
You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Seatstays with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 9kg / 20lb - Clamp for rear reflector, tail light mount - Size: 39.5 x 30 x 12cm / 15.6" x 11.8" x 4.7" - Weight: 870g / 1.92lb
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)
The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 7kg / 15lb - Clamp for front reflector, tail light mount - Size: 33 x 29. 3 x 12cm / 13" x 11.5" x 4.7" - Weight: 840g / 1.85lb
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
- Oversized AL-6061 tubular alloy rack 10mm tubing - Top surface width: 90mm to 128mm - For 26-inch / 700C wheels (max tire 29 x 2.1-inches) - Max capacity: 20kg - Features T-Bar (patent-pending): two adjustable arms move independently from the rack structure and to keep the rack parallel to the ground regardless of frame type or size - Sets rack 6cm behind the axle for improved heel clearance - M5 threaded holes on dropouts to mount a rear fender straight onto the rear rack
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Page 1 of 1