Shoes

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Ultimate road competition shoe with supremely engineered fit and optimum power transfer. FEATURES - 360° surround wrapping upper creates a supremely engineered fit for all riders. - Heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustments. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. Specialized took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

Feast your eyes on the all new Garneau Tri Air Lite Shoes. LG took their best-selling Tri-400 shoe and gave it all the upgrades you could ever imagine. Some would even call it space grade, and we guarantee it’ll get you from T1 to T2 cooler, faster, stronger, and way more comfortable than anything you’ve ever seen. Technical Details: - Shoe Technology : Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 8.3 oz/235 g - What's Included: Shoe bag included - Outsole: Patented Carbon Air Lite composite extremely ventilated outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Closure System: Boa L6 micro-adjustment, Hook and loop straps: Easy to adjust

Sometimes an act of creation begins with an act of destruction. For the new Sagan Collection, the rainbow has been deconstructed—broken down to its core components to celebrate a rider defined by much more than rainbow stripes. It began with an almost absence of color and continues now with stunning, shimmering colors and graphics that are as beautiful and mercurial as the masterpieces Peter paints on the road. What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is "yes" to all of the above. With the S-Works 7 Road, you get shoes with no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to our lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that we've kept in line with the motto every watt is sacred. In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials also add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything we know about footwear, compacted into one shoe with no compromises and no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

Made for winter hikes, snowshoe adventures, and long, cold days outdoors, the adidas Terrex winter boots are waterproof and fully insulated. COLD.RDY with PrimaLoft® wraps your foot in heat-sealing warmth, while RAIN.RDY seals out slush, snow, and rain to keep feet dry all day long. A BOA® Fit System lets you dial in a precise fit for confident footing. A BOOST midsole cushions and brings energy to every step, on and off the snow and in all temperatures. The Stealth winter grip rubber provides high-friction traction for confident footing on slick, icy ground. - BOA® Fit System for micro-adjustment, effortless on-and-off, and secure, consistent hold - Designed to insulate your body in cold weather — stay warm with adidas COLD.RDY - Waterproof textile upper with molded toe cap and external heel clip - PrimaLoft® Parley insulation keeps your feet warm all-day - adidas BOOST delivers incredible energy return and instant comfort with each step to keep you going

Pro-level Tri racing shoes designed to shorten transitions and optimize power transfer. Synthetic Leather Lighter, stronger and more durable than natural leathers External Heel Cup External curved heel cup suppresses foot twist and roll Quick Straps For fast triathlon transitions Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats - T1-Quick strap and extra-wide upper opening simplify and speed up transitions - Lightweight, rigid carbon fiber composite sole efficiently transfers power - Water-resistant microfiber synthetic leather with strategic venting - Breathable 3D mesh breathes great and dries fast - External heel cup stabilizes heel - Large heel loop is easier to grab

Good for the mud, good for stones, the Garneau Mudstone shoes have a flat outsole that's great for riding and walking around the trails, with a recessed insert that's compatible with all styles of SPD cleats. Great for Mountain Biking, Fat Biking, or any conditions when water and cold are present. The Mudstone Shoes have an extra insulated toe box with a high volume fit last, so you can wear thick socks without having to size up. They're fully waterproof with a three-layer construction using synthetic leather and a neoprene sealed cuff for better protection. BOA IP1 dial is easy to adjust while riding with gloves, and the Ergo Grip II outsole provides excellent traction in wet walking conditions. - Shoe Technology: "EEE" last specially designed for a higher volume, perfect for wearing thicker socks in cold temperatures - Closure with reversed hook and loop strap allows for fast transitions - Ergo Grip 2 outsole with removable studs provides excellent traction for walking and configured to maximize mud clearing - 3 layer construction with felt, 3mm PE, and foil to block the cold from the outsole - Boa IP1-S two-way micro-adjustment for easy replacement with hook and loop strap - Front opening with sealed zip prevents infiltrations - 435g (size 42) - SPD cleats fit all major MTB pedals - Cleats sold separately

The Carbon LS-100 III Shoes take all the features you love from the previous version, with the addition of Garneau's most innovative feature: the X-Comfort Zone. X-Comfort Zone technology allows the foot to swell up to 5mm while riding, thus eliminating hot spots and discomfort. It also allows for wider feet and eliminates bunions over time. The Boa IP1-S dial allows you to micro-adjust your fit with the twist of a knob, and our patented carbon composite outsole provides maximum power output. The shoes also come with a COOLMAX insole to provide cooling during hot summer months and Power Zone technology for maximum efficiency. The Carbon LS-100 III Shoes look amazing, are super durable and a great choice to complete your cycling outfit. Technical Details: - Shoe Technology : X-Comfort Zone - Power Zone: Increased arch support and power transfer - Shoes Weight: 8.3 oz / 235 g (size 42) - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX: Moisture wicking, breathable and ventilated - Closure System: Boa IP1-S two-way micro-adjustment: Custom fit and easy replacement - Cleats: Cleats aren't included with the shoes.

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. They have Velcro closures for a customizable, adjustable fit, a comfortable design, and a composite outsole that provides just the right level of rigidity. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Three-strap offset Velcro closure for a superior fit. - Synthetic upper with mesh venting for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt and two-bolt cleat pattern fit all major road and mountain pedals. - Approximate weight: 290g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

This is one of our best sellers across all Collections. It was designed by Louis Garneau himself after suffering a lot during the 1984 Los Angeles Olympics because he couldn’t find any technical shoes on the market at the time. And we’ve continued to improve it year after year since then. With a perfect racer fit, the carbon sole maximizes the energy transfer on the pedal and the sleek lines fit the foot perfectly while the perforated inner sole keeps you cool. We’ve thought of everything! Read the technical sheet, you’ll be impressed too. Technical Details: - Technology: RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture-wicking, breathable, and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

To give a break to the 26 bones that squash and squeeze in your foot while you’re riding, we have patented a unique X-Comfort Zone. It’s a small section inside the shoe that can expand up to 5 millimeters to prevent numbness. Without any extension system, the toes end up on top of each other and get numb. Thanks to this innovation, you won’t have to end your ride before you’re done ever again. For great performance, we’ve used a carbon composite sole that optimizes energy transfer on the pedal. We wish you an excellent season! - Technology : RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture wicking, breathable and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

Transfer maximum power to the pedals. The Kestral Pro Boa combines our stiffest sole and clipless compatibility for an efficient all-mountain ride. The Boa Fit system means you can dial in a secure fit, while the wide Stealth C4 rubber sole provides confident footing in all terrain. Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort. - Boa Closure System for micro-adjustment, and secure and consistent hold - Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort - Stealth C4 rubber sole provides confident footing in all terrain - Durable, lightweight EVA midsole - Enjoy the comfort and performance of OrthoLite sockliner - Regular fit, clipless style

Designed to withstand the elements and provide comfort on rugged trails, the Trailcross GTX Flat Shoe blends a durable, hiking-inspired build with a high friction Stealth Phantom rubber outsole. - Bike and Hike outsole: designed for grip at the toe and heel while maintaining a pedal platform under foot - Weather-friendly GTX (Gore-Tex) mesh upper for breathability and comfort - Textile-free and closed cell sockliner - Lace tuck on the middle of the tongue - Neoprene cuff keeps debris out - Non-marking Phantom Dotty outsole for grip on and off the bike - Midsole flex points allow flex while hiking but keep stiffness while on the pedal

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

The pinnacle model within the Freerider family, the Freerider Pro VCS Mid includes upgraded features, including D30 ankle protection and a PRIMEKNIT ankle cuff to keep debris out. This shoe is for the all-mountain rider looking for added protection, quick-drying materials and unbeatable grip to keep them going over any trail. - Synthetic upper with impact resistant toe box for protection from trail hazards - Compression-molded EVA midsole balances pedal feel and power output - Hook-and-loop closure straps - D30 inner ankle protection - Primeknit ankle cuff keeps out unwanted debris from the trail - Stealth S1 dotty rubber outsole for unbeatable grip

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

High-Top Shoes for Adventure Biking To bikepack is to explore. When the ride is more about the adventure than the destination, these adidas Five Ten mountain biking shoes fit the bill. Pedal, push, and hike in any terrain with the comfort, traction, and support made for all-day adventure. - Regular fit - Lace closure - Textile and mesh upper - High-top adventure biking shoes - EVA midsole - Non-marking Stealth Phantom rubber outsole - Imported

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head-on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Bont Riot+ , the world's first carbon-composite, heat-moldable, entry-level cycling shoe now available with BOA retention system. The Riot+ combines Bont's pro series technical features, our power transfer platform, anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level road cycling shoe. - Model: Riot+ - Material: Carbon Composite Construction with Microfiber Upper - Stack Height: 4.8 mm - Air Vents: Ventilations holes through upper and mesh inserts - Innersole: Comfort - Sole Guards: Replaceable - Cleat Mounting: 3 Hole Look Configuration - Closing Options: Boa dial and Z from Velcro strap - Weight: 280 grams

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

Lightweight Mountain Biking Shoes Ride, eat, sleep, repeat. Hike into the backcountry and feel the freedom of singletrack trails and abandoned dirt roads. Made for adventure riding over rugged terrain, these adidas Five Ten mountain bike shoes have the lightweight, cushioned feel of a trail runner and the pedal-gripping power to ride to any summit. - Regular fit - Lace closure - Textile upper with neoprene cuffs - Drain ports for water exit - Stealth Phantom rubber outsole - Imported

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Flat Pedal Mountain Bike Shoes with an Impact-Resistant Toe Box The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant urethane toe box - Stealth S1 Dotty rubber outsole - Imported

The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. - Lace closure - Quick-dry synthetic upper - Impact-resistant PORON toe box - OrthoLite sockliner - EVA midsole - Stealth S1 Dotty rubber outsole - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester

Flat pedal mountain bike shoes with an impact resistant toe box. The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. RECYCLED CONTENT This product is made with recycled content as part of our ambition to end plastic waste. PEDAL-GRIPPING RUBBER Stealth S1 Dotty rubber outsole is size-specific for maximum grip on and off the pedal. IMPACT-RESISTANT TOE BOX Three-layer reinforced toe box adds impact resistance. QUICK-DRYING UPPER Synthetic upper offers quick-drying convenience. SPECIFICATIONS - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant toe box - Stealth S1 Dotty rubber outsole - Imported

Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported

Flat-pedal mountain bike shoes for gravity and enduro riding. Choose your line and let it roll. The adidas Five Ten Impact Pro shoes set the standard for flat-pedal mountain bike control. Pedal-gripping tread and a wide, stiff platform support aggressive enduro and gravity riding. Go ahead and send it. PEDAL-GRIPPING CONTROL Stealth S1 rubber provides unmatched pedal grip. WIDE, STIFF PLATFORM Reinforced midsole provides a stiff platform for aggressive riding. IMPACT RESISTANT PORON reinforced toe box adds impact resistance. SPECIFICATIONS - Lace closure - Quick-dry synthetic upper with reinforced toe box - Stiff, supportive feel - Gravity-minded mountain biking shoes - Compression-molded PU midsole - Stealth S1 rubber outsole - Imported

Lightweight, high-performance mid-range road shoe. Synthetic Leather - Lighter, stronger and more durable than natural leathers Carbon Sole/Mid Sole - Carbon fiber composite sole/mid sole Wider Cleat Adjustment - Expands range for mounting cleats - Surround wrapping upper structure reduces overlap and provides a glove-like fit - Low stack height midsole helps stabilize foot, maximizing power transfer and efficiency - Integrated sole and upper construction sets a new level of fit, stability, rigidity, and lightweight performance - Mesh/TPU/Synthetic leather composite upper provides a comfortable fit and better breathability - Lightweight carbon fiber reinforced nylon sole for power transfer

The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Multiple widths available. - Approximate weight: 365g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with a L6 Boa® for precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram™ rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

SUPREME PERFORMANCE CLIPLESS The MTB 4.0 PRO Clipless shoe is a SPD clip shoe featuring a deep 25mm indexed cleat channel. The 15mm rear extension reduces strain on the Achilles muscle and adds stability and comfort for rigorous gravity riding. The stabilizing neoprene ankle collar will give you that feeling of added confidence as well. It’s quick drying material and great ventilation make it an ideal all-weather shoe for enduro and downhill riders. While the standard 4.0 Clip shoe has laces, this 4.0 PRO model features a micro-adjuster MOZ cable fit system. This lets you make micro-adjustments on or off the bike. Get the perfect fit and then lock in for the ride! What’s special about the Leatt shoe? Our secret rubber recipe is like your grandma’s hot sauce. Better than anyone else’s! The unique production method offers incredible RideGrip™ for great bike control in all weather conditions. The sole also features mud channels which efficiently keep the mud off the soles so that you are in constant contact with your pedals or the ground. If you want to stay on top of the game, then you need the Leatt MTB shoes. NEW MOZ cable lacing fit system located on top of the shoe: - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Leatt SPD Channel offers all-pedal compatibility: - Unique to Leatt SPD channels with extended travel for all type of riding - Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike Durable synthetic leather shoe upper suitable for tough riding conditions: - Tension straps for foot security and weather protection - Ventilation in the toe box and sides Control Flex Shank: - Semi-Rigid Flex control for great bike feel Midsole: - Anti-compression midsole for comfort. Insole: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Stabilizing neoprene ankle collar - Molded stabilizing heel and rigid reinforced toe area Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene

CLIPLESS TRAIL SHOE FOR HIGH PERFORMANCE RIDING A lightweight trail shoe with comfort and performance at the core of its design. The ATOP lace system is fast, convenient and precise. Make micro corrections fast and easily so that you have total bike control and comfort. This clipless shoe features a long cleat channel for the perfect pedal set up. Move the block forwards for a more power orientated ride, or farther back for more aggressive gravity riding. The breathable membrane makes this fast-looking trail shoe ideal for Spring / Summer / Autumn riding conditions. It is reinforced in key areas to ensure protection and extended product life. The overall shape, fit and construction of the Leatt 6.0 is ideal for trail, all-mtn and enduro riding. The sole features our durable RideGrip™ compound with a WaffleGrip pattern. This guarantees shoe durability, bike feel and grip off the bike if pushing the bike uphill or on slippery surfaces. If comfort and performance is what you are looking for, then the Leatt 6.0 are your next pair of shoes! Leatt SPD Channel offers all-pedal compatibility: - Unique to Leatt SPD channels with extended travel for all type of riding - Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike - ATOP lacing system allows single hand micro adjustments - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Adjustable, durable and breathable shoe upper: - Breathable mesh construction allows great temperature regulation and quick drying - TPU reinforcement for protection against the elements Control Flex Shank: - Semi-Rigid Flex control for great bike feel - Integrated design for a closer foot to pedal connection Midsole: - Anti-compression EVA for vibration and shock absorption Insole: - Anti-compression EVA insole for comfort - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Molded heel shield for protection and heel retention - Strategically placed TPU reinforcement on toe, heel and perimeter Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor Heel Grip: - Directional heel grip lining allows easy foot entry and retention while pedaling Weight: - 920 grams a pair US9.5

CLIPLESS TRAIL SHOE FOR HIGH PERFORMANCE RIDING A lightweight trail shoe with comfort and performance at the core of its design. The ATOP lace system is fast, convenient and precise. Make micro corrections fast and easily so that you have total bike control and comfort. This clipless shoe features a long cleat channel for the perfect pedal set up. Move the block forwards for a more power orientated ride, or farther back for more aggressive gravity riding. The breathable membrane makes this fast-looking trail shoe ideal for Spring / Summer / Autumn riding conditions. It is reinforced in key areas to ensure protection and extended product life. The overall shape, fit and construction of the Leatt 6.0 is ideal for trail, all-mtn and enduro riding. The sole features our durable RideGrip™ compound with a WaffleGrip pattern. This guarantees shoe durability, bike feel and grip off the bike if pushing the bike uphill or on slippery surfaces. If comfort and performance is what you are looking for, then the Leatt 6.0 are your next pair of shoes! Leatt SPD Channel offers all-pedal compatibility: -Unique to Leatt SPD channels with extended travel for all type of riding -Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike - ATOP lacing system allows single hand micro adjustments - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Adjustable, durable and breathable shoe upper: - Breathable mesh construction allows great temperature regulation and quick drying - TPU reinforcement for protection against the elements Control Flex Shank: - Semi-Rigid Flex control for great bike feel - Integrated design for a closer foot to pedal connection Midsole: - Anti-compression EVA for vibration and shock absorption Insole: - Anti-compression EVA insole for comfort - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Molded heel shield for protection and heel retention - Strategically placed TPU reinforcement on toe, heel and perimeter Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor Heel Grip: - Directional heel grip lining allows easy foot entry and retention while pedaling Weight: 805 grams a pair US8 Size: Size: US 6-9.5, UK 4.5-8, EU 37.5-42, CM 23-26.5

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)